simulation method

A Monte Carlo Simulation Method for Pricing the Forward-Starting Asian Option with Floating Strike Price

远期生效亚式期权定价的蒙特卡罗模拟法

At the aspect of sound effect simulation, after systematic analysis of the injection molding process, a sound simulation platform for injection molding virtual simulation is proposed with directsound. And this method provides a high sense of realism and immersion for virtual injection molding machine environment.

在音效仿真方面，本文通过系统地分析注射成型过程，采用DirectSound建立起了注射成型虚拟仿真的音效仿真平台，该方法从音效方面提供了高度真实感和沉浸感的虚拟注射机环境。

A simulation method using digital computer simulation technique ( DCST) is described to analyze and calculate the reliability indexes of interconnected generating system.

本文提出了一种采用数字计算机仿真技术（DCST）对互联发电系统可靠性指标进行分析与计算的仿真算法。建立了相应的互联发电系统可靠性DCST仿真计算模型。

On the basis of determining numerical simulation method of cyclone filter, the flow fields of the cyclones are numerically simulated respectively by use of professional computational fluid dynamics software FLUENT.

在确定了旋风过滤器数值模拟方法的基础上，利用FLUENT计算流体动力学专业软件对所设计的两种旋风过滤器分别进行了单管和多管流场的数值模拟。

Based on the study of formation mechanism and simulation method, two simulation methods of the aero-optical effects image degradation are proposed: the degradation simulation in a point spread function space, variable degradation simulation in point spread function space.

在对形成机理和仿真方法研究的基础上，提出了气动光学效应图像退化的两种仿真方法：点扩展函数空间不变的退化仿真，点扩展函数空间可变的退化仿真。

Parallel Calculation and Simulation Method of Nonlinear Ultrasound Field in Absorbing Medium

吸收媒质中非线性超声场的一种并行计算仿真方法

Three Dimensional Monte-Carlo Simulation Method for LMFBR Fuel Bundle Heat Transfer Under Loss of Coolant Accident Conditions

冷却剂丧失条件下钠冷快堆棒束传热的三维蒙特卡罗模拟方法

Hydrodynamic Pressure Distribution Simulation for Chemical Mechanical Polishing by Three-dimensional Lattice Boltzmann Method

利用三维格子Boltzmann法研究化学机械抛光中压力分布

As a parallel simulation method, it can imitate the real FMS operations more naturally.

它是一种并行计算法, 并能更自然地模拟FMS的运行.

A long term dynamic numerical simulation method of power system integrated variables grouping and seceding grouping strategy

综合变量分组与退出策略的电力系统长过程动态数值仿真方法

In view of the symmetric arrangement of the three conductors to the sheath center of a three-core power cable, this paper presents a new approach to calculation of electric field using a charge simulation method.

本文针对三芯电力电缆内三导体布置上的对称性，提出了一种采用模拟电荷法计算其电场的新算法。

The quench model under the condition of conduction cooling system was established and the quench propagation properties were studied by using numerical simulation method.

建立了导热冷却条件下的超导带失超模型，用数值模拟的方法来研究超导带的失超传播特性。

VR simulation is a visualized simulation method based on virtual reality technology. By creating virtual simulation environment of real complex system, the simulating process becomes more intuitionistic and immersive.

VR仿真是基于虚拟现实技术的可视化仿真方法，其通过对实际复杂系统的虚拟场景模拟，实现了仿真过程的高度直观化和沉浸感。

The quaternion feedback control laws was studied for the three-axis stabilization control using reaction wheels, a design method for the PID controller parameters was presented and the simulation results indicated that the control algorithm works efficiently.

针对以反作用飞轮作为执行机构的三轴稳定控制情形，研究了四元数反馈控制算法，给出PID控制器参数的设计，仿真结果验证了控制器设计是合理的。

The Monte Carlo simulation method and process are described in details.

详细说明了蒙特卡洛方法模拟样本的计算流程，生成模拟样本的技术方法。

Second, initial validation of this simulation method can eliminate the zero order diffraction components and the conjugate image.

模拟计算初步验证了这种方法能很好的消除零级衍射成分以及共轭像对全息重构质量的影响，提高了全息重构像的质量，证明了其可行性。

Simulation Method Analysis of On-board Movable Component Based on Absolute Coded Disk

基于绝对码盘的星载可动组件仿真方法分析

Studying of solid particle effects on three dimensional jet/ freestream flow field with particle simulation method

三维喷流流场中固体颗粒效应的粒子仿真方法研究

In the three-dimensional numerical simulation, quality loss is unavoidable and the volume correction method on Zheng-model is proposed which has obvious physical meaning, does not require any empirical formula and experience factor, and is also very easy to implement.

在三维数值模拟中，由于体积损失严重，本文对Zheng模型提出了体积修正方法，该修正方法物理意义清晰，不需要任何的经验公式和经验因子，也很容易实现。

Comparison between BFC and conventional mold filling simulation method is conducted by several simulation examples.

通过算例比较了BFC方法与基于笛卡尔正交网格方法的各自特点.

First, this paper uses the analytical method to analyze the reliability of substation bus arrangement then simulates the unit fault in the whole transmission network by Monte-Carlo Simulation method, and at last obtains the reliability index.

首先采用解析法对变电站电气主接线进行可靠性分析，然后采用Monte Carlo模拟法对整个输电网进行故障采样模拟，最后得到整个输电网的可靠性指标。

First of all, the principle and trait of PSpice which is the core of the simulation software, used in the circuit simulation is introduced. A new simulation method which is model-module-system stepping up is proposed based on applying the PSpice to the digital intelligent charging system.

文中首先介绍了仿真软件核心PSpice的电路仿真原理和特点，结合智能充电器系统的硬件特点提出了一种模型模块系统逐级向上的仿真方法。

The numerical simulation method can be used to optimize the curing temperature cycle, which can improve the quality of composite products.

模拟程序可以计算得到任意时刻复合材料内温度及固化度分布，通过数值模拟可以有效地优化固化加热工艺参数，提高产品质量。

Which blocking plate finite element analysis section, the simulation method, concluded that the edge of the blocking plate is the weakest stress.

其中堵板有限元分析小节，采用仿真模拟的方法，最终得出堵板边缘是应力最薄弱的地方。

Abstract This paper proposes a quasi 3 dimensional simulation method of the condenser, which can take the 3 dimensional influence caused by the variation of the cooling water temperature, and also reflect the influence of the cooling water technological process arrangement to condenser's performance.

提出了一种凝汽器的准三维模拟方法，它可以考虑冷却水温度变化产生的三维影响，也能反映冷却水流程布置对冷凝器性能的影响。

It calculates the dynamic response about the slopes using the numerical simulation method.

本文还用数值模拟的方法计算边坡的动力响应.

The optical energy losing and heat flux distribution at the exit of the optical transfer pipe is attained by experiment and numerical simulation method.

通过实验和数值模拟两种方法分析光导管出口处热流密度和光损失。

Based on spline function trajectory planning method, Lagrangian kinetics equation, fuzzy control theory, and OpenGL dynamic three-dimensional display, the simulation system of carrier crane is founded.

基于插值样条函数的轨迹规划法、机器人拉格朗日动力学方程和模糊控制器，以及基于OpenGL技术的三维动态显示，建立了舰载特种起重机的仿真系统模型。

This paper just studies the technology and method and puts forward the project of double computers simulation: the form of double computers simulation system, the requirements of the software and hardware design of flight control computer, double computers synchronization simulation method, concomitancy simulation method etc.

该文对这项技术及方法进行了研究，提出了双机仿真技术方案：双机仿真系统组成、对飞控计算机软硬件设计要求、双机同步仿真方法、伴随仿真方法。

The influence factors of LAPS characteristics such as silicon doping content, insulating layer thickness and light intensity are analyzed by means of circuit simulation method. The simulation results correctly reflect the reality characteristics of LAPS.

在此基础上，采用电路模拟方法仿真分析了影响LAPS特性的因素：硅掺杂浓度、绝缘层厚度以及光强等，仿真结果正确地反映了LAPS的实际特性。